DataTrace® General Accessories
-
DataTrace® General Accessories
Ecklund Accessories

Part number: 210279-001
Description: Combination can punch and countersink to create a hole for installation of receptacle, C-11

Part number: 210279-004
Description: Lever-type can punch to create a hole for installation of a Thermowell Datalogger

Part number: 210279-003
Description: Lever-type can punch to create a hole for installation of a receptacle, C-12


Part number: 200156-001
Description: Spanner wrench with handle for use with the IR Standoffs

Part number: 200161-001
Description: Rubber grommet to provide additional sealing for the Screw Coupling

Part Number: 210278-001
Description: Stainless Steel, two-piece receptacle for metal containers, C-5

Part Number: 210278-005
Description: Delrin, two-piece receptacle for metal containers, C-5D

Part Number: 210278-002
Description: Brass, two-piece receptacle for plastic pouches, C-5.1

Part Number: 210278-004
Description: Brass, two-piece receptacle for plastic pouches, C-5.1M

Part Number: 123460-500
Description: Modified Hex Nut for C-5 Fitting

Part Number: 210044-500
Description: Gasket for C-5 receptacles (pkg of 100), C-16
Part Number: 124859-001
Description: Gasket for C-5.1 receptacles (pkg of 100), C-26
ID/Interface Sleeves

Part number: 124930-001
Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. Yellow, bag of 25

Part number: 124930-002
Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. White, bag of 25

Part number: 124930-003
Description: Pre-numbered 1-25 Polyolefin tubes for labeling Loggers. Red, bag of 25

Part number: 122028-001
Description: 0.8 inch inner diameter acrylic PC interface sleeve, for use with dual housing MPRF loggers
Screw Couplings

Part number: 124601-500
Description: Allows the DataTrace® probe to penetrate container lids or side walls using ECKLUND C-5 fittings (not included). For taper tip ONLY

Part number: 124299-500
Description: Allows the DataTrace® probe to penetrate container lids or side walls using ECKLUND C-5 fittings (not included). For bullet tip ONLY
Pressure Adapters
Part number: 124963-125
- Description: MPRF/MPIII Pressure Adapter with 1/8″ (3 mm) Union Fitting
Part number: 124964-125
- Description: MPRF/MPIII Pressure Adapter with 1/8″ (3 mm) Tube Fitting
Part number: 124964-006
- Description: MPRF/MPIII Pressure Adapter with 0.24″ (6 mm) Tube Fitting

Part number: 200194-001
- Description: MPRF/MPIII Pressure Adapter with ¾” Tri-Clamp Fitting
Part number: 200195-001
- Description: MPRF/MPIII Pressure Adapter with 1½” Tri-Clamp Fitting
Part number: 200196-500
- Description: MPRF/MPIII Pressure Adapter with 3” Tri-Clamp Fitting
Part number: 200197-500
- Description: MPRF/MPIII Pressure Adapter with 4” Tri-Clamp Fitting
rH Accessories

Part Number: 124752-040
Description: Dustfilter to protect RH sensor

Part Number: 124756-002
Description: Solid cap – extended to protect RH sensor during temperature calibration in a bath
Magnetic Holder

Part Number: 200204-002
Description: Clip attached to a magnet. Attaches logger to inside of Application Chamber/Rack for use in Temperature Mapping
Related products
Related services

DataTrace Pro Software
DataTrace Pro Software gives you greater insight on data logger productivity by creating process reports that help you analyze data and comply with regulatory requirements.
Learn more

Data Logger Calibration & Repair
For optimal performance, Mesa recommends Data Loggers get calibrated every year. Our 17-point calibrations are NIST-traceable and come with a 6-month warranty.
Learn more